<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

Posted for RYoung03A@aol.com:

Cutting Table I made was covered with .100 in. acrylic.  This can be obtained in 4 ft by 8 ft sheets and cut down as needed with a carbide circular saw.  This material is hard enough to support the glass but  soft enough not to dull the circular glass cutting blades too fast.  I also put a foam core sheet under  the acrylic marked off with 2 in. spaced diagonal lines (felt tip Sharpie)  which helped greatly in cutting the 2 in wide BID tapes.  I have my roll of glass at the rear of the table on a spool which can be turned easily .Bob Young

LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.