Return-Path: Received: from marvkaye.olsusa.com ([207.30.195.94]) by ns1.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35) with SMTP id com for ; Wed, 28 Jun 2000 21:32:08 -0400 Message-Id: <3.0.3.32.20000628213905.00ace9e0@olsusa.com> Date: Wed, 28 Jun 2000 21:39:05 -0400 To: lancair.list@olsusa.com From: Marvin Kaye Subject: cutting table X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Posted for RYoung03A@aol.com: Cutting Table I made was covered with .100 in. acrylic. This can be obtained in 4 ft by 8 ft sheets and cut down as needed with a carbide circular saw. This material is hard enough to support the glass but soft enough not to dull the circular glass cutting blades too fast. I also put a foam core sheet under the acrylic marked off with 2 in. spaced diagonal lines (felt tip Sharpie) which helped greatly in cutting the 2 in wide BID tapes. I have my roll of glass at the rear of the table on a spool which can be turned easily .Bob Young >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>