<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

I opened up a hole in my wing tanks to install a fuel gage and noticed that
the original builder had coated the inner walls and ribs with fuel sealer
prior to gluing the top and bottom together. This left the hysol unsealed
and exposed to fuel. Is this correct practice, or should I re-seal the tanks
to cover the hysol?

thanks, Scott
mailto:spdahlgren@attbi.com

LML website:   http://members.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair
Please remember that purchases from the Builders' Bookstore
assist with the management of the LML.

Please send your photos and drawings to marvkaye@olsusa.com.