<x-flowed>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

Hi all:

I was just starting my 235's rudder pedal assembly (adjustable on 1/4" sliding plywood floor) and on page 275 figure 266 there is a note: "trim and align so ctr block captures both rudder bars (snug together)".  Indicating a trim of the lower part of the inboard pedal bar...but no dimension for this trim is given (or any minimum clearence to the nose gear tunnel).  I could use about 1/2" more clearence between the bar and the nose gear O/C pivot axle.

Do any of you remember how much you trimmed off the lower part of the inboard pedal bar here?  Or what clearence you used to the fuselage sides/nose gear tunnel?

Thanks in advance.

-Ed Sikora
(LC235, 290 maybe)
Merritt Island, Fl
planeman23@hotmail.com

LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.

</x-flowed>