Mailing List lml@lancaironline.net Message #61314
From: ED MARTIN <edmartintx@gmail.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Legacy roll actuator problem
Date: Fri, 09 Mar 2012 11:06:55 -0500
To: <lml@lancaironline.net>
 Message Header

Undecoded Message
        THANKS Paul.   We are starting to do the annual inspection on mine now.   This will be an item of interest (along with the starter-adapter).   Regards,  Ed   N767EM

On Thu, Mar 8, 2012 at 6:48 AM, paul miller <paul@tbm700.com> wrote:
Upon installing new belts in the Legacy I noticed play in the roll servo actuator arm.  A mirror showed the 3 screws holding the arm to actuator shaft had sheared off.  The last screw fell out as I was playing with it and the roll servo was then useless.

I had roll hunting this past summer and now I know where the oscillations were coming from.    I'm guessing Tru-trak has some guidance on this issue as the new arms seem to be a different design.

Paul
Spruce Creek


--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html


Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster