Mailing List lml@lancaironline.net Message #61313
From: Charles Brown <browncc1@verizon.net>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Legacy roll actuator problem
Date: Fri, 09 Mar 2012 11:06:55 -0500
To: <lml@lancaironline.net>
 Message Header

Undecoded Message
Paul, this crummy pic, in addition to showing that I had the limit plate in upside down at first, also shows 1996-vintage TruTrack servo arm mounting.  
Image
090822a Pitch servo.jpeg





On Mar 8, 2012, at 6:48 AM, paul miller wrote:

Upon installing new belts in the Legacy I noticed play in the roll servo actuator arm.  A mirror showed the 3 screws holding the arm to actuator shaft had sheared off.  The last screw fell out as I was playing with it and the roll servo was then useless.

I had roll hunting this past summer and now I know where the oscillations were coming from.    I'm guessing Tru-trak has some guidance on this issue as the new arms seem to be a different design.

Paul
Spruce Creek

<IMG_4170b.jpeg>--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster