Mailing List lml@lancaironline.net Message #45091
From: Peter Field <anpfield@sbcglobal.net>
Sender: <marv@lancaironline.net>
Subject: RE: Seasonal Question on working with eGlass
Date: Thu, 29 Nov 2007 11:28:44 -0500
To: <lml@lancaironline.net>
Richard:
     Any heater that exhausts carbon monoxide into your hangar will cause everything metal to rust if you use it continually.  I used a large torpedo heater for one winter and discontinued its use because everything metal that was exposed started to rust or exfoliate, plus all that carbon monoxide was not good for me to breathe.  I don't think the CO will hurt the e-glass.
 
Pete Field
LNC2, St Louis


From: Richard T. Schaefer [mailto:schaefer@rts-services.com]
Sent: Tuesday, November 27, 2007 4:25 PM
To: lml@lancaironline.net
Subject: Seasonal Question on working with eGlass

As it’s starts to get cooler (It’s never really cold in Austin) I have thought about auxiliary heat for the hanger.

 

Is there any problem with some of the forced air heaters Diesel/Jet Fuel, or Propane in terms of the interacting negatively with the E-glass construction.

i.e. If it’s ok for me to breathe is it ok in the construction environment ? These are not externally vented so I was worried about chemical interaction with the exhaust fumes.

 

Richard T. Schaefer      E-mail: schaefer@RTS-Services.com

RTS Services Inc          Web: http://www.RTS-Services.com

7330 Cave Hollow         ___        Voice:  (512) 923-2755
Austin, TX 78750          |         Fax:    (830) 798-9644
               `---------(*)---------'

 

 

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster