<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

Rob,

Your best solution, but not least expensive is to buy the installation
kit AND roll and pitch servos and install all at the same time. You will
need the roll servo on hand when installing the brackets which hold it
in place. (The bracket is bonded to the floor and right side center
console under copilot seat) If you do a retrofit, I can guarantee you
will wind up removing and relocating the hydraulic plumbing for the
right main gear and inboard gear door. You will avoid many headaches by
installing this servo BEFORE putting in the hydraulics.

ps...  You will get the best price (been there/done that) from Caribbean
Coast Avionics at Opa-Locka Airport, Opa-Locka, Fla. Ask for Jose
(800-539-7399) Tell him I told you to call.

Angier Ames

LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.