Mailing List lml@lancaironline.net Message #2904
From: Bob Chesley <rchesley@soca.com>
Subject: Re: Fuel flow - Rough engine
Date: Wed, 14 Jul 1999 22:36:55 -0700
Cc: <lancair.list@olsusa.com>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

Scott,
   How far off is your fuel flowmeter?  I have Electronics International and it
seems fairly close, although I have only pumped about 40 gallons.  I'll make an
adjustment after the first 100 gallons.
   When I lean, the EGT peak seems a lot longer and flatter than I am used to.
Then it goes down about 25 deg. and gets rough sooner than I would have
expected.  I still getting used to the instruments, as well as the a/c.
   The engine seems to be running well.  Oil temp was ~200 today, but then I was
doing some of the "running-hard-break-in" with temperatures 30 degrees above
standard.  I understand that the new "soft" mounts really make a difference.

Bob




LML homepage:   http://www.olsusa.com/Users/Mkaye/maillist.html
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster