|
Tracy,
We would love to see your RV8 or RV4 and you. Are
you comming to Oshkosh by any chance. If so, what days will you be there?
Robert Bollinger
----- Original Message -----
Sent: Saturday, July 24, 2010 10:10
PM
Subject: [FlyRotary] Re: SPAM-LOW:
[FlyRotary] Re: Tie Down Hardpoints
I ended up going with aluminum.
The plate was fabricated
from 1/4" Aluminum.
The bushing is threaded at 1/2" - 13.
The weight
turned in at 5.1 oz. each.
From: "Al Gietzen" <ALVentures@cox.net>
Sent:
Saturday, July 24, 2010 8:23 PM
To: "Rotary motors in aircraft"
<flyrotary@lancaironline.net>
Subject:
SPAM-LOW: [FlyRotary] Re: Tie Down Hardpoints
I know, an old
thread, but; yes, the oxide layer that forms inhibits further
corrosion of
the SS; but imbedding in epoxy (fiberglass) protects it
even
better.
Al
|