|
|
That my friend WOULD SURELY push Tracy over the edge. So, we probably shouldn't tell him. ;-)
Mark
On Feb 2, 2008 6:18 PM, Ed Anderson < eanderson@carolina.rr.com> wrote:
Well, we probably could, Mark. Unless
someone brings up the question about how to set up the calibration
procedure for each bolt{:>)
Ed
----- Original Message -----
Sent: Saturday, February 02, 2008 6:03
PM
Subject: [FlyRotary] Re: Torque
indicating bolts
ED,
With a little prodding, I bet we could talk Tracy
into an EM-2 upgrade that would display the torque readings on the EM-2.
;-)
Mark S.
On Feb 2, 2008 10:26 AM, Bob Perkinson < bobperk90658@bellsouth.net>
wrote:
Just guessing Ed, I would think that you could get a EC2 and an EM2 and
your fuel flow computer for what a set of 13B housing bolts would cost.
Bob Perkinson
--------------
Original message from "Ed Anderson" <eanderson@carolina.rr.com>: --------------
For those of you who are keenly interested in the
torque reading of your motor bolts at all times
My nephew thought these might be of interest to us
flying rotary types {:>)
Ed
|
|