|
Ed,
You could mount the miniature cameras from a bunch of old cell phone (should be able to pick them up out of the trash behind the Virizon office) above each bolt, Have them wired to a switching unit and display them on your fuel flow screen.
Something else you could work on.
Bob
-------------- Original message from "Ed Anderson" <eanderson@carolina.rr.com>: --------------
Well, we probably could, Mark. Unless someone brings up the question about how to set up the calibration procedure for each bolt{:>)
Ed
----- Original Message -----
Sent: Saturday, February 02, 2008 6:03 PM
Subject: [FlyRotary] Re: Torque indicating bolts
ED,
With a little prodding, I bet we could talk Tracy into an EM-2 upgrade that would display the torque readings on the EM-2. ;-)
Mark S.
On Feb 2, 2008 10:26 AM, Bob Perkinson < bobperk90658@bellsouth.net> wrote:
Just guessing Ed, I would think that you could get a EC2 and an EM2 and your fuel flow computer for what a set of 13B housing bolts would cost.
Bob Perkinson
-------------- Original message from "Ed Anderson" <eanderson@carolina.rr.com>: --------------
For those of you who are keenly interested in the torque reading of your motor bolts at all times
My nephew thought these might be of interest to us flying rotary types {:>)
Ed
|