Is there any particular brand of thermocouple that you all would recommend that seems to hold up well under the stresses of the rotary exhaust system?  There are so many types and to choose from that I'd rather attempt to get one that will last for a while prior to failure.  Also from what I've read it seems to be best to run continuous wires right from the thermocouple and through the firewall to the gauge (EM2 in my case)...is that what most of you have found to work the best, or can the leads be run through a 24 pin connector (or similar device) at the firewall and then onto the engine monitor?  Thanks for any input... 

 

I really thought this would be the year that I'd finally make Tracy's get together but job  constraints have conspired against me again!  To all heading down there have a fun and safe time!

 

Doug

RV-9A, 13B, EC2/EM2 

OK City, OK