|
|
|
Bob,
Mazdatrix catalog shows An/Metric adapters for the oil
cooler and states that the fitting for the Rear Housing of
Engine
(also fits 86-92 Coolers - but only needed if you are making
your own lines) The adapter size given by Mazda for those years oil
coolers is
ADAPTER -10 18MM THD
So it appears that both holes in the oil cooler is
18mm.
Ed A
----- Original Message -----
Sent: Saturday, August 20, 2005 2:25 PM
Subject: [FlyRotary] Re: Oil Cooler
Connections
> Thanks Ed (and Al
also),
>
> I was just writing a reply to Al give a little more
detail, but his
> observation seems to have been correct. I thought
the nut on the
> bottom might have something to do with the thermostat
that I thought
> the stock Mazda coolers had. Did you remove or
disable the thermostat
> or, am I mistaken in thinking it has one?
>
> One other question that concerns me a little, I was told by Racing
Beat
> when I ordered the AN adaptors, that the Mazda cooler had a 16 MM
and
> an 18 MM fitting like the front and rear covers. This cooler
(from
> Bruce T.) has two 18 MM threads. Does the manual mention the
thread
> sizes?
>
> Bob W.
>
>
> On Sat,
20 Aug 2005 14:12:51 -0400
> "Ed Anderson" <eanderson@carolina.rr.com>
wrote:
>
>> Bob, I just checked the Mazda manual and
it clearly shows the inlet (oil
>> from engine oil pump) is the top
fitting and outlet (to inlet on rear
>> housing) the side
fitting. Now for what its worth I mistakenly hooked mine
>> up
as your labels indicate - then later realized my mistake - but, since the
>> oil temps and pressures were fine, I never changed it to the
correct
>> direction.
>>
>> Ed
>>
>>
>> ----- Original Message -----
>> From: "Bob
White" <bob@bob-white.com>
>> To:
"Rotary motors in aircraft" <flyrotary@lancaironline.net>
>> Sent: Saturday, August 20, 2005 11:48 AM
>>
Subject: [FlyRotary] Oil Cooler Connections
>>
>>
>> > To prevent me from making a mistake (agian), do I have the
input and
>> > output labeled correctly in this photo?
>>
>
>> > Thanks,
>> > Bob W.
>>
>
>> > --
>> > http://www.bob-white.com
>> >
N93BD - Rotary Powered BD-4 (real soon)
>> > Prewired EC2 Cables -
http://www.roblinphoto.com/shop/
>> >
>>
>>
>>
--------------------------------------------------------------------------------
>>
>>
>> > --
>> > Homepage: http://www.flyrotary.com/
>>
> Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
>> >
>>
>>
>>
>>
--
>> Homepage: http://www.flyrotary.com/
>>
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
>>
>>
>
>
> --
>
http://www.bob-white.com
> N93BD -
Rotary Powered BD-4 (real soon)
> Prewired EC2 Cables - http://www.roblinphoto.com/shop/
>
> --
> Homepage: http://www.flyrotary.com/
> Archive
and UnSub: http://mail.lancaironline.net/lists/flyrotary/
|
|