|
Message
Can you make one of them things with a 90
degree bend, L shaped to get length ? jofarr
Keep in mind that the 24" length wasn't cast in stone, and
was just an example of using the space you had available. I've
thought about using a 90 degree turn, but if I really needed 24", I
could have that by making a few more bends in the exhaust pipe from the
engine.
What I will hope to do, is come straight out of the engine,
into the muffler at the front end, then let the muffler extend straight back
toward the prop. That would be an easy 18". The muffler could
go farther forward, but would require some monkey motion to get the exhaust pipe
forward to the front end of the
muffler.
I also wondered if having space in front of the inlet pipe
would be of any benefit. In other words, the inlet pipe would enter
the muffler 6" from the front end, and the exit would be in the back. Just
don't know if that extra 6" would be of any
benefit.
Cheers,
Rusty
|