|
|
Ben,
Thanks for the info. I have look at TWM. I am looking for air horns for a
1.375 (35mm) tube, but the smallest I could find was 40mm. I am working on
my intake for a 4 port Renesis as well. I am interested in what other
people are doing on a Renesis intake, if you would care to share. Attached
is an adapter block I drew for the secondaries, runner tube into one side
and the other is sized to fit either a 195500-2020 (550cc) injector or a
Renesis injector.
Thanks,
Joe
----- Original Message ----- From: "Ben Schneider" <plumberben@yahoo.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Saturday, June 11, 2005 8:56 AM
Subject: [FlyRotary] Re: Air Horns
Joe,
Check out TWM induction. They are a little pricey, but the spinnings
are very nice. They have them in many different sizes, and as spinnings,
or they will make them to fit various carbs an throttle bodies. Most of us
would likely use just a spinning. That is what I have.
Ben Schneider
RV7 Renesis 4 port(building intake manifold)
>> Homepage: http://www.flyrotary.com/
>> Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|