|
Mark,
Per an email reply from Tracey on 12/30/04, he
indicated the ECU's maximum current draw is 1/4 amp. (controller, not
including injectors or spark.) Tracey did not suggest a breaker size, in
my application I selected 2 3amp breakers. I have 2 18 gauge wires from
the CBs to the controller with diodes on the controller end. The
wiring may be oversized, but I am building a canard so the run is long, and
I wanted to minimize voltage drop for obvious reasons.
----- Original Message -----
Sent: Thursday, May 19, 2005 10:02
AM
Subject: [FlyRotary] EC-2 Breakers
Ed,
Since you’re running breakers on
the flight critical stuff, can you tell me the recommended breaker size for
the EC-2 controller? Tracy seems to have hidden this information
somewhere in the fine print. I’m assuming that it would be the same for
the 3-rotor engine?
Mark
S.
|