<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

I'm wiring my power pac and the book shows only two wires to the contactor.
I have black, blue striped and green striped wires.  I'm planning to use #6
wire for the load and return.  That will give about 0.7 volt drop for a
double run totaling approximately 30 feet.  Question is: where do the wires
go on the contactor? and is #6 wire fat enough?  What if I run a #4 wire
back to the 171 bulkhead and use it for B+ there and do a similar return
wire? That would provide a power source for the rest of the tail. Do I need
to separate that load?  All thoughts appreciated.
Walter Dodson

LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.