George, Put a dam across the hinge openings on the side facing the door. The dam both provides a larger surface for the door seal to press against, and eliminates water pouring into the cabin when the seal is deflated if there is residual water in the hinge recess. I believe the front dam can be almost full height, but the rear dam needs to be a bit lower due to interference with the hinge nuts. I replaced the nuts for the hinge that were directly above the dam with low profile nuts to allow a higher dam. Pete -----Original Message----- From: George Wehrung [mailto:gw5@me.com] Sent: Wednesday, November 06, 2013 9:11 AM To: lml@lancaironline.net Subject: My door pics Here a few door pics -- For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html