Mailing List lml@lancaironline.net Message #63677
From: steve <n5276j@aol.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Re: stalls
Date: Wed, 02 Jan 2013 11:17:23 -0500
To: <lml@lancaironline.net>
This is good advice, small tail drivers pay attention to the sink rate while not yet stalled , You need to be able to flair on the deck while at slow speeds.
I practice slow flight engine out for the day that I hope never comes that I have to land dead stick some where. 100 mph is too fast for me to land off field when I can control it at 75mph ias easily and still flair but maybe only once before I sink.
 
steve alderman  25SA  360


-----Original Message-----
From: Andres Katz <bu131@swbell.net>
To: lml <lml@lancaironline.net>
Sent: Wed, Jan 2, 2013 7:46 am
Subject: [LML] Re: stalls

Why not?
If you never stall the airplane when it happens you won't be able to recognize what is doing and how to react. Learning what your airplane does when it stalls and recovering from it is essential to safe flight. In flying Acro we stall the airplane multiple times, at low altitude and in front of ungrateful critical sobs that will laugh at you when you screw up but will give you good tips about recovering from it. Every airplane stalls differently, right wing drop, left wing drop, bucking etc. learning what the airplane does pre stall is the most important. My ZLIN 50 is so nice it begins to buckle and bitch at me and tells me what I need to do (lower the stick) before it kills me. I advise you to get a good instructor and go to 10,000 feet and spend the best 2 hrs of your life stalling your airplane and getting to know her. It's 
Ike making love to your wife and knowing when she is happy.....
Sorry about that but
My old savvy instructor when checking me out in single seat airplanes always told me the same, go out to a safe altitude, stall the airplane, learn when it does it look at the speed when it happens, add 10  knots and come and land, it has never failed to get me down safely ie yak55, Jungmeister, ZLIN, chipmunk etc.
My few cents worth of it. You will live longer.

Sent from my iPad

On Jan 2, 2013, at 7:15 AM, "David M. Powell CRFA" <superdmp@sonic.net> wrote:

I have made the decision prior to purchasing to avoid stalls altogether in my 360.  After reading the stall and stall spin accident information, I just don't think it's worth the risk.  On take-off, I stay in ground effect for the half second it takes to make it into the green after wheels up; on landing, I approach well above stall for my flap configuration, and let the speed bleed off only a few feet above the threshold.  During normal flight, I don't even get near a typical slow flight speed.  Too many variables in a home built airplane with no precise envelope, a header tank that is PROBABLY where I think it is, but could be off by 30 or 40 pounds if the gauge is stuck; possible extra wait in the tail area (water retention after heavy rain).


From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Ed Gray
Sent: Tuesday, January 01, 2013 9:43 PM
To: lml@lancaironline.net
Subject: [LML] stalls

Colyn, As I said, AVOID STEEP TURNS IN THE PATTERN.  If you are flying low under the hood, I hope you have a well qualified  safety pilot
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2805 / Virus Database: 2637/5980 - Release Date: 12/23/12
Internal Virus Database is out of date.
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster