You need their special connector. The
switch is off/on, it doesn’t feed a digital
signal so no feed to the EFIS.
-----Original Message-----
From: Lancair Mailing List
[mailto:lml@lancaironline.net] On Behalf Of Jeffrey
W. Skiba
Sent: Monday, February 07, 2011
2:53 PM
To: lml@lancaironline.net
Subject: [LML] Re: LNC2 Hydraulic
Landing Gear Pressure Switch Wear Issues
Bruce,
Does this replace the
existing switch? Screws in and you set your desired pressure on the body of the
sensor ?
Or does it need
another component to work like a converter or relay ?
If it just screws in
can it also out put the actual pressure to say a Grand Rapids EFIS ???
for example ?
Sent: Monday,
February 07, 2011 11:32 AM
Subject: [LML] Re: LNC2 Hydraulic
Landing Gear Pressure Switch Wear Issues
Several of our guys
(including me) have junked our mechanical pressure switches and moved to solid
state adjustable switches.
http://www.automationdirect.com/adc/Search/Search?searchquery=PSD25-OP-5800H&cmd=Search&fctype=adc.falcon.search.SearchFormCtrl&TxnNumber=-1
No virus found in this
message.
Checked by AVG - www.avg.com
Version: 10.0.1204 / Virus Database: 1435/3428 - Release Date: 02/07/11