Mailing List lml@lancaironline.net Message #57006
From: Pete Cavitt <cavittp@aol.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] LNC2 Tires revisited
Date: Sun, 26 Dec 2010 11:19:50 -0500
To: <lml@lancaironline.net>
I used to have that problem.  As soon as I started using talcum powder when installing a new tire/tube the problem stopped.  I now am able to reuse my tubes when replacing tires.  Usually get 2-tires to 1-tube life...  Have been running 45 PSI

Pete Cavitt N320PL
+1-619-701-0784 Cell

On Dec 24, 2010, at 11:30, Sky2high@aol.com wrote:

235/320/360 Tires, Legacy nose tire:
 
Well, I did it.....  I let my Lancair 320's main tire pressure hover around 40+ psi and the left main tube was wearing on the inboard side even though I am using Desser tires.  Same old pinhole tube leak result when I found it flat.
 
<leak%20cropped.jpg>
 
I will endeavor to keep the pressure at least at 48-50 psi.
 
BTW, I also bought replacement tires and tubes from Desser - interesting...........
 
The old tire was marked:
Light Sport Experimental Aircraft Use
Max Speed 62 MPH
 
The new tire:
Max Speed 100 MPH
Made in Vietnam
 
Both had the same information:
Load Range D
Load Rating 500 Lbs @ 70 psi
Tubeless
 
The tubes were different also in that the old stem was marked "Rim master" and the new one with "Whitehorse".  The new one also  had "Leak Guard" and "Butyl Tube" printed on it.
 
Oh well, they have the same part number.  Time will tell if the new ones are better.
 
Scott Krueger
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster