<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

I have an IO360 with the sump modification that moves the fuel servo unit to the front. In this position, the throttle control arm is fairly close to the front cross-over exhaust pipe. What is the best routing for the throttle cable? Should I route the cable below both cross-over pipes with a large arc in the cable to the arm, or is it okay to route the cable between the oil pan and the pipes? The preferred routing seems to me to be the more direct routing between the pipes and the oil pan, but is the close proximity to the oil pan and the exhaust pipes okay if I install heat shields where it crosses the pipes? Thanks.

Mike Reinath
Std. Build 360
N3602M

LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.