Mailing List lml@lancaironline.net Message #45093
From: Tom Sullivan <toms1@chartermi.net>
Sender: <marv@lancaironline.net>
Subject: Re; Workshop Heat
Date: Thu, 29 Nov 2007 11:28:44 -0500
To: <lml@lancaironline.net>
   Living in a colder area, I've seen a lot of use of those portable heaters (we call them torpedo heaters due to the physical look of them).  About 10 years ago, a very respected local builder was using them in a basement on a construction site (no structure, but basement walls at the time) to heat the area enough to pour the cement floor.  I can't remember if he had plastic over the walls, or if the floor had been installed already.  The home was being built for his daughter and son-in-law.  The son-in-law (a friend of mine) came over to see what was being done that morning before going to his normal job, and found his father-in-law passed out on the floor.  Long story short, he never made it; died of CO2 poisoning.
 
   These types of heaters have a tendency to create a lot of condensation as well.  As Jeff and others have said, use a system that does NOT introduce CO2 into the work area.
 
   I am presently constructing a solar heating system on the south side of my hangar.  With $1,000 a year bill to heat my hangar to just 45 degrees, I suspect this system will save me $400 to $500 a year, with a cost that will be recovered in about a year.  Here is a link to the system if anyone is interested.
 
 
Tom Sullivan
KIMT
(Tropical section of the U.P. of Michigan)
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster