For what it's worth, mine are in carbon and they don't have the "blobs" as
you discussed... However, I don't like how thin the seam is either, so I'll
most likely build up the nose and the tail just a bit with a bid or 2 and
some flox/micro.  I doubt there is an aerodynamic reasoning for it however.

Alan -----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Bill
Bradburry
Sent: Wednesday, June 20, 2007 5:03 PM
To: lml@lancaironline.net
Subject: [LML] Front Wheel Pant-Legacy Fixed Gear

I noticed that the front wheel pant was really tail heavy.  Turns out it has
a large blob of resin? in the back of it.  Maybe equivalent to a half to a
full pint glob.
Should I remove this? or is it there for some aerodynamic or wheel shimmy
reason?

The main wheel pants have a small amount in them, but it appears to be just
the problem of bringing the two sides together for joining.  Not nearly as
much of a blob.

Not many Legacy FGs, but the pants are the same as the ES...

All inputs appreciated.

Bill B

--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html