|
|
Chat,
*Way to go*, You just found a bug in the drawings... :( And to think I
authored them... Major bummer. I've attached the drawings that are *in
error* just for reference....
Ok, so let me be more specific.
The drawings that are attached, the ones that uses the FF are *wrong*....
See that serial line going to the TT and it's "Y"'d off the SL-30.... That's
the wrong part, it should be "Y"'d off the FF, not the SL30!
I'll update the drawings and post the corrected version.... Too funny, it's
just taken til now to catch that... I don't have a FF so that's probably
why.
Hope this solves the problem ,
Alan
BTW, I've attached the GADAHRS version (without FF), it is correct.
-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of
Chatfield S. Daniel
Sent: Wednesday, June 13, 2007 3:40 PM
To: lml@lancaironline.net
Subject: [LML] Re: FreeFlight 1101/ Trutrak interface
I made a mistake on the address of the previous post. Take a look at the
attachment.
Chat Daniel
Super ES
-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Tom
Gourley
Sent: Wednesday, June 13, 2007 1:07 PM
To: lml@lancaironline.net
Subject: [LML] Re: FreeFlight 1101/ Trutrak interface
"The TruTrak needs a GPS signal, and should be getting one from the Pinpoint
GADAHRS which is receiving the 1101 GPS signal. (I am not using the GPS on
the Pinpoint) The Chelton is getting the correct signals from the 1101."
Wiring diagrams I've seen from Chelton show the output of the GPS being
wired directly to both the Chelton and the TruTrak. The GPS data for the
TruTrak is not routed through the Chelton.
Tom Gourley
--
For archives and unsub
http://mail.lancaironline.net:81/lists/lml/List.html
|
|