Mailing List lml@lancaironline.net Message #34646
From: Scott & Glema <keighan@computan.on.ca>
Sender: <marv@lancaironline.net>
Subject: Hydraulic pump
Date: Fri, 24 Feb 2006 21:44:56 -0500
To: <lml@lancaironline.net>
I've just run my gear up and down on my  LIV for the first time and I have
a couple of questions.
 
1.  Is the pump supposed to make a very high pitch squeal?
If not what would cause it?  The sound is almost unbearable.
The fluid tank was 3/4 full before priming and was about 1/2
full after. 
 
2. The main gear don't go up and down together.  The left gear
is always first up followed closely by the right.  Coming down
the left goes down and locked even before the right leaves the
wheel well.  Should both of the mains be going up and down
together.
 
3. The pump runs for about 10 - 15 seconds after the gear is up.
 
4. The flap accuator is very touchy in the off positon.  Wiggling
seems to help keeping the flaps up and to stop them from
creeping back down. 
 
Any advice would be greatly appreciated.
 
 
Scott Keighan  
 
LIV
 
 
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster