|
|
Hello Doug,
I built a pair of the CreativeAir LED nav lights/landing lights. I also put in his low profile strobe. It was a very tight fit in our IV wingtip but it did fit. The IV wingtip is thinner than the 320 wingtip, so if it fits in the IV it should fit in the 360. I mounted the strobe as low and as far forward as I could in the cutout. To help that effort, I ground off the flange on one side. That way, it shouldn't strobe into the cockpit. I'll try to remember to take a picture tomorrow.
Bill Harrelson
5zq@cox.net
N5ZQ 320 1,100 hrs
N6ZQ IV 4.0791%
Hi Folks. I'm getting ready to complete the wing tips on my 360. I've
been looking into LED/Strobe/Landing Light combo's for the tips -
creativeair. Has anyone been successful in incorporating all three into
the enclosed tip? Where you able to mount the strobe and the landing
light in the tip and have enough clearance/no interference for
everything? Has anyone had temperature problems with the 65-75 watt
halogens in the enclosed tip? Anyone recommend a removable or
permanently bonded tip in the 360. I've searched the archives and
cannot find anything definitive.
|
|