X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Tue, 15 Nov 2005 08:56:28 -0500 Message-ID: X-Original-Return-Path: <5zq@cox.net> Received: from eastrmmtao05.cox.net ([68.230.240.34] verified) by logan.com (CommuniGate Pro SMTP 5.0.1) with ESMTP id 830843 for lml@lancaironline.net; Mon, 14 Nov 2005 18:10:17 -0500 Received-SPF: none receiver=logan.com; client-ip=68.230.240.34; envelope-from=5zq@cox.net Received: from OFFICE ([68.110.249.147]) by eastrmmtao05.cox.net (InterMail vM.6.01.05.02 201-2131-123-102-20050715) with SMTP id <20051114230927.ODO14098.eastrmmtao05.cox.net@OFFICE> for ; Mon, 14 Nov 2005 18:09:27 -0500 X-Original-Message-ID: <003101c5e970$775f7240$6401a8c0@OFFICE> From: "Bill&Sue" <5zq@cox.net> X-Original-To: "Lancair Mailing List" References: Subject: Re: [LML] Wing Tips, LED's,Strobes, Landing Lights X-Original-Date: Mon, 14 Nov 2005 18:09:29 -0500 MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.2180 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 Hello Doug, I built a pair of the CreativeAir LED nav lights/landing lights. I also put in his low profile strobe. It was a very tight fit in our IV wingtip but it did fit. The IV wingtip is thinner than the 320 wingtip, so if it fits in the IV it should fit in the 360. I mounted the strobe as low and as far forward as I could in the cutout. To help that effort, I ground off the flange on one side. That way, it shouldn't strobe into the cockpit. I'll try to remember to take a picture tomorrow. Bill Harrelson 5zq@cox.net N5ZQ 320 1,100 hrs N6ZQ IV 4.0791% > Hi Folks. I'm getting ready to complete the wing tips on my 360. I've > been looking into LED/Strobe/Landing Light combo's for the tips - > creativeair. Has anyone been successful in incorporating all three into > the enclosed tip? Where you able to mount the strobe and the landing > light in the tip and have enough clearance/no interference for > everything? Has anyone had temperature problems with the 65-75 watt > halogens in the enclosed tip? Anyone recommend a removable or > permanently bonded tip in the 360. I've searched the archives and > cannot find anything definitive.