|
|
Posted for Don Ryan <dryan@gt.rr.com>:
Scott, unfortunately I did not take this system out before sending to
Colorado Composites to fix. (another mistake) All of these parts are long
since gone. I did forget to mention that my CB does remove power from all of
this system. For a time I pulled this breaker, during a flight, until I needed
to move the gear.
What would have caused the bubbles? If we have the press. switches in this
circuit and I close the HP switch wont it open the low pressure switch since
the press will be higher that the lo press switch setting?
Sky2high@aol.com wrote:
Don, et al,
As I promised, I performed pump experiments with the following setup:
All I had to do was watch the bubbles (this is not a Lawrence Welk device).
...snip...
|
|