|
|
<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
<< Lancair Builders' Mail List >>
<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
The Jeffco 9700
Sealer should be brushed on so that there is a very slight overlap of sealer
<SNIP>
------
Don Parsons
Houston, TX
DAP@Lancair-ES.com<<
Thanks, Don - I have a question. I closed my wings at the factory and we
did everything "according to the book." When the skin was placed apparently
it moved slightly and now the "squeeze bead" is not right at the edge of the
rib cap, leaving a strip of thin Hysol exposed. I found this by shining a
light into the tank and noticing that I could "see" through the wing along
the edge of the ribs. I assume this thin layer of Hysol is an adequate fuel
seal, correct? The reply from Lancair is that yes, and it could be actually
used as the tank sealant, but the gray stuff is just better.
Gary Casey
ES
LML website: http://members.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore: http://www.buildersbooks.com/lancair
Please remember that purchases from the Builders' Bookstore
assist with the management of the LML.
Please send your photos and drawings to marvkaye@olsusa.com.
|
|