To everyone:

I talked to Walter about this piece. The idea is to divert the air around
the flat spot on the side of the cylinder that has no fins. The part that I
made that looks like a scoop, needs to be closed on the top. Or a box as Pat
describes. I plan on working on the bottom area by the end of this week, I
had to order some .050 aluminum to do the work.

Regards

Ron Raby


----- Original Message -----
From: "John Schroeder" <jschroeder@perigee.net>
To: "Lancair Mailing List" <lml@lancaironline.net>
Sent: Monday, December 20, 2004 1:06 PM
Subject: [LML] Re: Baffling Additions


> > I'm intending on making a box that is closed top and bottom, making it
> > independent of the air flow inside the oil cooler box.
> >
> > Pat:
> >
> > That is correct.
>
> Walter -
>
> Are we talking about just the lower baffle & fins of the left rear
> cylinder by the oil cooler of the IO-550?
>
> Or all of the baffling and bottom fins?
>
> Thanks and all the best for the holidays.
>
> John Schroeder
> Lancair ES - Almost ready to mount the engine.
>
> > Also, the lower baffle needs to wrap around the lower fins up to the end
> > of the fins.
> >
> > Walter
>
>
>
>
> --
>
>
>
> --
> For archives and unsub http://mail.lancaironline.net/lists/lml/
>