Hi John

 

Yes, I am putting together a kit for the Legacy.  Actually, it will be more like three kits depending on whether you want the lightest aircraft possible (good thermal but only a little acoustic attenuation on the high frequency end), medium weight (good thermal and medium attenuation) or maximum thermal and acoustic.  We were able to pull about 8 dB out of Dave's plane (in climb out, cruise was about 6.5-7 dB).  Since the dB scale is logarithmic, that's actually a lot of noise.  We added about 25 lbs as I remember to get that.  More would be possible with some additional weight.

 

The kit will include absorbers for the walls, felt/barriers for the floor and nose wheel well and a 3 part isolation/barrier/absorber firewall blanket for the inside.  Also there will be gaskets for noise leaks sealing, film, tape, etc.

 

I am pretty much up to my ass until after OSH at this point but I am trying to get the kit assembled by then or slightly after.

 

Dan Newland