Could anybody suggest a source (or sources) for spacers of various thickness that are placed between the axle and the trailing beam of the landing gear. The standard spacer is .250 thick and I need either .125 or .075. The thinner dimension opens up wheel well clearance to provide some extra room needed for the fitting process on the mechanical stops (hydraulic cylinders). I understand from prior postings, that when the hydraulic circuit is operating, there are additional torsional loads that will change clearances that are set without the hydraulics hooked-up.

 

Mark Quinn

Carbon Fiber 360 (65%)

Spruce Creek Fly-in

Daytona Beach, Florida