Posted for "Matt Hapgood" <hapgoodm94@alum.darden.edu>:

LNC2 w/ MKII tail.  Typically see about 200 to 205 KTAS on my MicroEncoder.
This at about 70% power (23" or 24" and usually about 2400 RPM).  Fuel burn
in the 8.5 GPH range.  I can get a tiny bit more speed with a lot more fuel
burn.  At about 6.5 GPH I typically see 190 KTAS.  But I don't do that very
often!

I have never noticed the hydraulic pump burping, but wouldn't be surprised
if it were - I've just never noticed the cycling light on.

Matt


 > > >    Just wanted to do a quick straw poll as to what TAS people are getting
from
the LNC2?

Does everyone have the standard Lancair pressure switches installed?
How often does the gear motor do a brief cycle whilst (a) on the ground or
"down & locked" and (b) airborne
 < < <