|
|
use 1/4" bolts instead of the 0.063 pins.... center of rotation is the center of the pin (not the center of the bearing).
also note the bolt is harder than then Al "hoop". I noticed
black Al oxide from the outside "hoops" after 30hrs of legacy
flight.. One could wiggle the elevator inside the expanding "hoops".
I made a fatter "hoop" and hard coated it..
http://rob.com/lancair/2003.05/thumb/new.jpg
http://rob.com/lancair/2003.05/thumb/old.jpg
--
Utopian Maturity: Eternity, Liberty, Equality now Fraternity & Altruism.
|
|