My understanding is that there is actually
a TCM spec somewhere that indicates how much torque it takes to turn the
starter motor when it is not running. I heard that Iskra is way out side that
spec and so it can’t turn backwards with the torque of the spring alone.
The old Prestolites were designed to this spec.
Kevin
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Richard T. Schaefer
Sent: March 09, 2010 15:22
To: lml@lancaironline.net
Subject: [LML] Re: starter drive
problem IO550
What do I need to focus on ?
1) How fast the starter gear returns to original position ?
2) Or the fact that it is still moving after being disengaged ?
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Kent
Sent: Tuesday, March 09, 2010 2:34
PM
To: lml@lancaironline.net
Subject: [LML] Re: starter drive
problem IO550
Here is a link to a video that Aircraft Specialites made of
a cutaway starter adaptor with a Iskra and a common old-style Presolite motor.
Basically it just shows the sliding worm gear not retracting
all the way and it shows the end of the worm gear shaft no relaxing.
The mechanism needs to be able to unwind a bit so
to relax the clutch spring after engagement.
----- Original Message -----
Sent: Tuesday, March 09,
2010 11:40 AM
Subject: [LML] Re: starter
drive problem IO550
I
just put a skytec starter to replace my iscra. Replaced one drive under
warranty. The skytec has a solenoid which disengages the motor from the
starter. The permanent magnet starters can create drag on the starter spring
which results in wear. Cirrus does not allow Continental to ship them
motors with the Iscra.
-----Original
Message-----
From: Douglas Brunner <douglasbrunner@earthlink.net>
To: lml@lancaironline.net
Sent: Tue, Mar 9, 2010 10:41 am
Subject: [LML] Re: starter drive problem IO550
Also had to replace my
starter drive on an IO-550 in a Legacy. Unfortunately, engine mounts had
to be loosened and engine swung forward.
Apparently,
different starters vary in their tendency to kill the starter drive
adapter. My understanding is that the Iskra is the worst and that the old
Prestolite is the best. Allen Barrett can probably give you further
information.
From: "cfi@instructor.net" <cfi@instructor.net>
To: lml@lancaironline.net
Sent: Tue, March 9, 2010 6:35:01
AM
Subject: [LML] starter drive
problem TSIO550
I know there was some discussion a while back about starter drive issues, but I
can't find any specifics. I've developed a problem where the starter slips
and won't engage, so I suppose I'm a victim of the TCM problem at 400hr
TT. Is is possible to remove the adapter without moving the engine
forward? I have an A/C pump on the back of the engine too, so it's very
packed behind the engine. I'm not even sure what to remove. Anyone
have some ideas to make this as easy as possible? Any photos?
Thanks
Ron
<hr
size=2 width="100%" align=center>
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.733 / Virus Database: 271.1.1/2732 - Release Date: 03/09/10
01:33:00