<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

Can any of you who have run your throttle cable to an IO-360-B1F tell me approximately (like, within 1/4 inch) where the throttle cable goes thru the firewall?  I'm engineering my left-hand throttle quadrant and I need to create some linkage between the left-hand quadrant and the standard center throttle cable.  Measurements from the inside of the cockpit are preferred (up from the floor, over from the nose gear tunnel wall), but if you have a measurement from the firewall side, I can transfer it.

Blueprint Q shows an "approximate throttle cable location for forward mounted fuel injected engines".  Is the IO-360-B1F forward mounted?  Is this location anything close to what y'all have built?

Don't worry, I won't actually drill the hole until I have the engine....

Thanks in advance.

- Rob Wolf

LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.