From: RWolf99@aol.com
Message-ID: <8c.2b6d993.26314dc9@aol.com>
Date: Fri, 21 Apr 2000 02:23:05 EDT
Subject: IO-360 Throttle Cable
To: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
Can any of you who have run your throttle cable to an IO-360-B1F tell me 
approximately (like, within 1/4 inch) where the throttle cable goes thru the 
firewall?  I'm engineering my left-hand throttle quadrant and I need to 
create some linkage between the left-hand quadrant and the standard center 
throttle cable.  Measurements from the inside of the cockpit are preferred 
(up from the floor, over from the nose gear tunnel wall), but if you have a 
measurement from the firewall side, I can transfer it.

Blueprint Q shows an "approximate throttle cable location for forward mounted 
fuel injected engines".  Is the IO-360-B1F forward mounted?  Is this location 
anything close to what y'all have built?

Don't worry, I won't actually drill the hole until I have the engine....

Thanks in advance.

- Rob Wolf
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>