<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

Richard Swain asks about the tie down devices:  I installed the same brackets you have.  Bond the plates to the spars at or near
the location called out in the manual.  DO NOT drill the spars for bolts.  If I
recall, the wing units went in before the lower skin is bonded in and mounted on
the aft spar face.  Locate them vertically such that the threaded end is flush
with the eventual wing surface (cut the clearance hole in the lower skin and fit
it a couple of times).  It's a nice installation.

Regards,
Ed de Chazal

LML homepage:   http://www.olsusa.com/Users/Mkaye/maillist.html