|
Message
Hi, Rusty....I found an e-mail that I had
saved from Dave Atkins. When I inquired about my injectors, their reply
was....the injectors are 72lp/hr 4 amp peak and hold. Does this shed
any light? Thanks. Paul Conner
Hi Paul,
72 lb/hr is the same as 758 cc/min. That's
about as small as anyone here is running for total injector capacity, but it
should still be enough. The only 72 lb/hr injectors listed on the TWM
site are Rochester (MSD) 2900-2014.
Cheers,
Rusty
|