Ok, here is new information to me. I posted on the
Velocity list regarding my oil temps and was informed that
oil temperature should be measured coming OUT of the
coolers, not out of the engine like I have set up.
This is just the opposite from the way the factory has the
coolant plumbing run as the stock coolant temperature sensor
is near the thermostat housing as it comes out of the engine
and into the radiator. I do not know where the stock oil
sensor is located (if I did, I now forget) but Al G. and
John Dibble state the temp should be taken for oil coming
out of the coolers. Heck, if this is the case, my oil may
be quite a bit cooler than I was thinking. Opinions
please. It should not be too difficult to add a sensor to
where the oil enters the engine. Don't know if the Delta
will be much, but perhaps enough....
What say Ye?
Chris