|
|
Thanks Dave
I didn't understand how at 22psi you where only developing ~250Hp.
That now makes sense. I thought 22psi was a really high boost.
So you are charging at ~1.5 x 100%VE (naturally aspirated) however the charge temp is significantly higher.
So if your 13B would develop say 180Hp at 7K RPM without boost, and you are now getting ~250Hp at 45" 200F that seems to make some sense.
Steve Izett
On 26/09/2011, at 10:18 PM, <stevei@carey.asn.au> wrote:
Thanks John
So when the MP gauge reads 45" that is referenced then to a vacuum.
So 45" Hg = 22.1psi - 14.7psi = 7.4psi
That makes more sense.
Can anyone comment on Q2. in my previous post?
Cheers
Steve Izett
On 26/09/2011, at 10:06 PM, John Slade wrote:
On 9/26/2011 10:02 AM, stevei@carey.asn.au wrote:
If Dave is boosting to 45"Hg then am I right that that is ~22psi.
I think not, Steve. According to my calculations that equates to about
7.5 PSI of boost.
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
The contents of this email are confidential and intended only for the named recipients of this e-mail. If you have received this e-mail in error, you are hereby notified that any use, reproduction, disclosure or distribution or the information contained in this e-mail is prohibited. Please notify the sender immediately and then delete/destroy the e-mail and any printed copies. All liability for viruses is excluded to the fullest extent of the law.
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
|
|