|
|
Ed, Bob,
Thanks for the quick reply, guys! I am planning to replace my oil cooler
and I hoped that my adapters would work..no joy! The new cooler is M22X1.5
:>(
Bill B
-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Bob White
Sent: Tuesday, August 18, 2009 9:20 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: MAzda oil cooler fitting sizes
You beat me to it Ed. Here's the data from Racing Beat.
http://www.racingbeat.com/resultset.asp?partnumber=11901
However, The fittings on the Second Gen oil cooler uses 18 mm threads for
both fittings. I had a devil of a time finding those washers though. I ended up re-using
the ones I had by heating them up red hot and letting them cool slowly.
Bob W.
On Tue, 18 Aug 2009 21:00:11 -0400
"Ed Anderson" <eanderson@carolina.rr.com> wrote:
Bill, here they are at MazdaTrix, looks like 16mm for front cover and 18mm for rear housing
Adapter
Location
Sealing Washer
11901 <http://www.mazdatrix.com/../getprice.asp?partnum=11901>
Front Cover (all through 92) and 74-85 Oil Cooler, 16mm
41-6000-9956 <http://www.mazdatrix.com/../getprice.asp?partnum=41-6000-9956>
Oil Line Fittings
11902 <http://www.mazdatrix.com/../getprice.asp?partnum=11902>
Rear Housing of Engine and 93-95 Front Cover, 18mm
(also fits 86-92 Coolers - but only needed if you are making your own lines)
41-8000-9956 <http://www.mazdatrix.com/../getprice.asp?partnum=41-8000-9956>
http://www.mazdatrix.com/b6.htm
Ed Anderson
Rv-6A N494BW Rotary Powered
Matthews, NC
eanderson@carolina.rr.com
<http://www.andersonee.com> http://www.andersonee.com
<http://www.dmack.net/mazda/index.html>
http://www.dmack.net/mazda/index.html
http://www.flyrotary.com/
<http://members.cox.net/rogersda/rotary/configs.htm>
http://members.cox.net/rogersda/rotary/configs.htm#N494BW
http://www.rotaryaviation.com/Rotorhead%20Truth.htm
<http://www.dmack.net/mazda/index.html>
_____
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Bill Bradburry
Sent: Tuesday, August 18, 2009 8:51 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] MAzda oil cooler fitting sizes
Does anyone remember the thread size for the oil coolers and/or the outlet of the block on the 13B?
Seems like it was M22 or M23 and I don't remember the thread per inch (or per cm??)
Bill B
__________ Information from ESET NOD32 Antivirus, version of virus signature database 3267 (20080714) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/
--
Homepage: http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html
|
|