Kelly;
that's where I ordered mine and found it where no longer available. The
week before he had checked, and they were available. I've checked 3 other
vendors – no one has one in stock. I'm looking at the MoCal Laminova
C43-330 (http://64.202.180.37/files/laminova.pdf). Very compact, but
lower heat rejection capability that the TOC 300.
Al
-----Original Message-----
From: Rotary motors in aircraft
[mailto:flyrotary@lancaironline.net] On
Behalf Of Kelly Troyer
Sent: Friday, March 14, 2008 10:24
PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Oil temps,
O-rings
Check with these people............
--
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold
-------------- Original message from "Al
Gietzen" <ALVentures@cox.net>: --------------
That is the kind of "Real
World" info we like to hear.......Particularly
since there is some difference of opinion as to the
need or suitability
for the use of the "TES" seals among the
group..........
--
Kelly Troyer
My 20B has the stock O-rings, and I've
had the engine exit oil up to 235-240 a number of times, coolant temp to 200F
– never for very long - no issues. I figure a max short duration limit on
the pan temp is 250. Max on oil return, about 220F. Cruise below 190.
I'm installing an oil/coolant exchanger
looking to reduce the oil temp by about 15 degrees.
I had done all my analysis around using a
Setrab TOC300, then when ordering found they have stopped making it.
Anyone have one lying around?
Al