|
Chris,
Concerning your RPM problem. My
Renesis is doing the same thing. Plus, at staging, it coughs like an old
smoker trying to cough up a lung and the higher the RPM goes the less the
mixture monitor displays. At staging it is only on about 5% of the
time. I have talked with Tracy and he has dispatched the FIX, at
least a partial one. His other 2 fixes have been dead on!
Should arrive today or tomorrow. The tentative thinking is that electrical
Noise is causing the mixture and the rpm portions to scramble their little
silicone brains. No mixture display and it is real hard to lean the
mixture. Have you tried putting a 1000 ohm resistor across the
CAS. This solved my starting problem.
About your restart
problems. When the engine compartment gets hot, my fuel pumps
vapor lock for a while. I can hear mine do
it. Yours may be too far away. Check the fuel
pressure. I will work on this after I get it running well.
Already have a remote thermometer so I can get some temperature data
in the pump compartment and a cooling duct.
Don Walker
Took a break this weekend from the aluminum
mistress!
|