|
|
Bob,
What I suggested was that you test one injector at a time until you had tested all three of the primary injectors. I am pretty sure that all three primary injectors (it could be the secondaries as far as I know) fire when you push the program button. So, disconnect two of the three primaries, push the program button and listed for the "click", then disconnect that one and connect the second one and repeat until you've tested all three.
An alternative method would be to have a buddy push the program button while you listed with a stethescope on each injector.
Mark
On Jan 13, 2008 9:31 AM, <
BMears9413@aol.com> wrote:
Ahhh,
Thanks Mark. I woulda worked my ass off all day trying to make that work. I
think I can only hear one injector firing on the prime mode. But it was only me
in the garage. so I will get a helper today to push the button. And your saying
that the primer does only fire one injector so its probably right. I've already
installed my harness to its final location, so I cant move the harness to other
injectors....well maybe one, without a major movement. I hate that modes not
there...what a great test feature. O well, guess I'll just get a prop,
some oil, and hit the starter and see what happens!
Bob Mears
|
|