John;
I’m using a Moroso cap; http://www.moroso.com/catalog/categorydisplay.asp?catcode=29113
which I got from some racing products dealer. It fits a standard filler
neck which I probably got at the same place on-line. For that cap I used a nice machined aluminum
filler neck; for the standard 15-16# cap I used a less expensive neck that is
formed from sheet stock.
Al
-----Original Message-----
From: Rotary motors in aircraft
[mailto:flyrotary@lancaironline.net] On
Behalf Of John Downing
Sent: Friday, March 16, 2007 1:49
PM
To: Rotary motors in aircraft
Subject: [FlyRotary] pressure caps
Al, I looked today and could not
locate a pressure cap with more than 16# capacity. Mazdatrix has caps
listed without the pressure. Where is the source for the higher pressure
caps. JohnD
At the moment scratching head on the simplest way to hang muffler on
rubber mount from tube and fabric airframe. I believe I'll need some SS
sheet w/fiber frax to ward off becoming a flaming turkey