Mailing List flyrotary@lancaironline.net Message #30860
From: Ernest Christley <echristley@nc.rr.com>
Subject: Re: [FlyRotary] Re: pitot inlet
Date: Thu, 23 Mar 2006 10:57:02 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Dale Rogers wrote:


>From the archives, another useful link:

http://www.frigidair.net/Parts/product_EV.html

Look for EV6203

 

Dale, I had looked at that sight a few times, but had never seen the 'more' button on the right hand extreme of the scrolling list at the bottom.  That opened up a whole new world!!

I like the looks of EV4798732PF and EV4798751PF.  The former is 12.125x9.5x4.125 and the latter is 8.25x11x4.125.  Since I'm stuck with a long duct, I might as well milk the pressure recovery for all its worth.  The extra thickness will be a good thing in this case, I think.  More than that, the hose connections look really beefy, and don't extend past the outer boundary of the radiator profile.  That will make the installation a little easier.

--
        ,|"|"|,               Ernest Christley     |
----===<{{(oQo)}}>===----     Dyke Delta Builder    |
       o|  d  |o          www.ernest.isa-geek.org  |
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster