|
|
George the RX8 is 320mm as well.
Greg
Bill,
The dish is 2mm deeper and the holes could be redrilled and it looks like
it's 320mm as well! Less mucking around by getting the right one. I will
check on an RX8 to confirm your suspicions.
George
> I have a flexplate that I suspect is an RX-8 unit, but I am not 100%
sure.
>
> Here is a picture.
>
> It measures 1.350" from front to back surfaces. The bolt circle
> for the torque converter is about 10.25" (too big).
>
> Bill Dube'
>
>
> At 12:33 AM 12/27/2005, you wrote:
>
> > > Again Thanks Bob,
> > >
> > > I would suggest you hang on to this one for yourself. The RX-8
flexplate
> > > won't work. (Ask me how I know.)
> >
> >Bill
> >I'm asking - is it the diameter or the depth or both.
> >I remember seeing the RX8 flexplate but can't recall what it looks like
> >exactly - got a photo and dimensions?
> >George (down under)
> >
> >
> >
> >
> >--
> >Homepage: http://www.flyrotary.com/
> >Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
>
--------------------------------------------------------------------------
--
----
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
>
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
|
|